Modifying A Line Card Port; Removing A Line Card Port - 3Com 3C10402B Administrator's Manual

160 C 8: PSTN G
HAPTER
Table 35 Auto Extension Configuration (continued)
Button Mapping Setting
for This Line
Mapped to a button on the
Receptionist's Telephone (or
to a button on an Attendant
Console associated with the
Receptionist's telephone)
Mapped to a button on a
user telephone (or to a
button on an Attendant
Console associated with the
user's telephone)
Mapped to a button on a
user telephone (or to a
button on an Attendant
Console associated with the
user's telephone)
Modifying a
Line Card Port
Removing a
Line Card Port
C
ATEWAY ONFIGURATION
Auto Extension
Setting Incoming Call Behavior
500 Receptionist's telephone rings. If no one answers, the call transfers
to the Automated Attendant.
NOTE: The call coverage point defined for the receptionist's
telephone has no affect.
The transfer occurs after the number of seconds specified in the
Time Out field for the appropriate time of day (Open, Closed,
Lunch, Other). Click PSTN Gateway Configuration > Analog Line
Cards and click an extension.
Extension of the User telephone rings. If no one answers, the call transfers to the
Receptionist Receptionist's telephone.
The transfer occurs after the number of seconds specified in the
Time Out field for the appropriate time of day (Open, Closed,
Lunch, Other). Click PSTN Gateway Configuration > Analog Line
Cards and click an extension.
If the receptionist's telephone is not answered, the call transfers to
the call coverage point defined for the receptionist's telephone.
500 User telephone rings. If no one answers, the call transfers to the
Automated Attendant.
The transfer occurs after the number of seconds specified in the
Time Out field for the appropriate time of day (Open, Closed,
Lunch, Other). Click PSTN Gateway Configuration > Analog Line
Cards and click an extension.
You can modify a line card port that is already configured.
To modify a line card port:
1 Click
PSTN Gateway Configuration
2 Click the extension of line card port that you want to modify.
3 Specify the port information. See the online Help for more information.
4 Click OK.
When you remove a line card port that is already configured, you remove
the port information from the system database.
> Analog Line Cards.