Reboot/Shutdown; Password Administration - 3Com 3C10402B Administrator's Manual

80 C 4: S
HAPTER YSTEM

Reboot/Shutdown

Password
Administration
M
AINTENANCE
Channel
■
Forward to Auto Attendant
■
Receive Maintenance Alert
■
Exclude from LCD
■
Exclude from Name Directory
■
To manage these settings, click Telephones and System-Wide Settings.
You must reboot the system after you upgrade software and you must
shut down the system software before you turn off power to your
system.
To reboot or shutdown the system:
1 Log on to the NBX NetSet utility using the administrator login ID and
password.
2 Click System Maintenance > Reboot/Shutdown.
3 See the online Help for procedures to reboot and shut down the system.
CAUTION: If you remove power from the system without first shutting
down the system software using the NBX NetSet Shutdown function, the
operating system must perform a file system check during the next
startup cycle to ensure file integrity. The file system check significantly
increases the time it takes for the system to come to a ready state. During
a file system check operation, the Call Processor's S1 and S2 status lights
flash in an alternating pattern.
The Password Administration window enables you to manage passwords.
The most common use is to reset a telephone user's forgotten password.
To set system passwords:
1 Log on to the NBX NetSet utility using the administrator login ID and
password.
2 Click System Maintenance > Password Administration.
3 From the drop-down list, select which of these types of passwords you
want to set: