Show Private-Group - NETGEAR GSM7248R Command Line Interface Reference Manual
Layer-2 stackable switches with static routing, software version 7.3
Hide thumbs
Also See for GSM7248R:
- Hardware installation manual (34 pages) ,
- Supplement manual (17 pages) ,
- Datasheet (3 pages)
Table of Contents
Advertisement
Command Line Interface Reference for the ProSafe 7200RS Series Layer-2 Stackable Switches
9.4.5 show private-group
This command displays the private groups' information.
Format
Mode
Interface
Port VLANID
Private Group ID
Private Group
Name
Private-Group
Mode
9-12
show private-groupname [<private-group-name>|<pri-
vate-group-id>|port <unit/slot/port>]
Priviledged EXEC
Valid slot and port number separated by forward slashes.
The VLAN ID associated with the port.
Total number of private groups is 192.
The name string can be up to 24 bytes of non-blank charac-
ters.
The mode can be either "isolated" or "community".
v1.0, October 2008
Port-Based Traffic Control Commands
Advertisement
Chapters
Table of Contents
