Display The Igmp Snooping Querier For Vlan Status - NETGEAR MS510TX User Manual

• Snooping Querier VLAN Address. Specify the snooping querier IP address to be
used as the source address in periodic IGMP queries sent on the specified VLAN.
8. Click the Apply button.
Your settings are saved.

Display the IGMP Snooping Querier for VLAN Status


To display querier VLAN status:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Switching> Multicast > IGMP Snooping Querier > Querier VLAN Status.
The Querier VLAN Status page displays.
The following table describes the nonconfigurable information displayed on the page.
Table 40. Querier VLAN Status information
Field
VLAN ID
Operational State
Operational Version
Operational Max Response Time
Smart Managed Pro Switches MS510TX and MS510TXPP
Description
The VLAN ID on which IGMP snooping querier is administratively enabled
and the VLAN exists in the VLAN database.
The operational state of the IGMP snooping querier on a VLAN. It can be in
any of the following states:
• Enabled. The snooping switch is the querier in the VLAN. The
snooping switch sends periodic queries with a time interval equal to the
configured querier query interval.
• Disabled. The snooping querier is not operational on the VLAN. The
snooping querier moves to disabled mode when IGMP snooping is not
operational on the VLAN or when the querier address is not configured
or the network management address is also not configured.
The operational IGMP protocol version of the snooping querier.
The maximum response time used in the queries that are sent by the
snooping querier.
Configure Switching
Access the Switch
141
on page 12.