Arp Timeout; Clear Arp-Cache - NETGEAR ProSafe GSM7228PS Cli Manual

no arp retries
This command configures the default ARP count of maximum request for retries.
Format
no arp retries
Mode Global Config

arp timeout

This command configures the ARP entry ageout time.
The value for <seconds> is a valid positive integer, which represents the IP ARP entry ageout
time in seconds. The range for <seconds> is between 15-21600 seconds.
Default 1200
Format
arp timeout <15-21600>
Mode Global Config
no arp timeout
This command configures the default ARP entry ageout time.
Format
no arp timeout
Mode Global Config

clear arp-cache

This command causes all ARP entries of type dynamic to be removed from the ARP cache. If the
gateway keyword is specified, the dynamic entries of type gateway are purged as well.
Format
clear arp-cache [gateway]
Mode Privileged EXEC
Routing Commands
ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3
v1.0, May 2010
4-5