Table of Contents
Advertisement
1 Overview
Interruption Tolerance
Communication Driver Test and Adaptation
Element Structure
User Interface
Namespaces
Basic Software
Online Changes
1.3.1
Connectivity
The server provides "two-sided" connectivity: one side provides access to applications that
support OPC DA; the other side provides access to FP Series PLCs.
In order to enable the user to perform functional tests, a simulation mode is implemented.
This mode allows you to design the application without any PLC being connected to the
computer.
OPC Connectivity
Device Connectivity
OPC connectivity
The server complies to the following OPC DA client/server technologies:
•
OPC DA 1.0a
•
OPC DA 2.05a
•
OPC DA 3.0
Data can be exchanged between client and server in asynchronous, synchronous and
refresh mode.
Device connectivity
A standardized interface allows you to:
•
Monitor data from Panasonic FP PLCs
•
Synchronize data access and data writing
•
Use various communication types
PLCs can be accessed via
connect to remote stations via dial-up phone calls.
14
serial port
and Ethernet. The server offers modem support to
ACGM0143V4EN
Advertisement
Table of Contents
