Nortel DMS-100 Manual page 98

Example of a MAP response for LPPs:
LIM 1 ISTB
Unit0: ManB
Unit1: InSv
Example of a MAP response for ELPPs:
LIM 0 ISTB
Unit0: ManB
Unit1: InSv
5 Refer to the MAP display in step 4 to determine if the processor is an LPP or
an ELPP.
If the processor is
LPP
ELPP
6 Access the F-bus level of the MAP display by typing
>FBUS
and pressing the Enter key.
Example of a MAP display:
FBus0: ManB
FBus1: InSv
Note: In the example, B indicates that the F-bus is manual busy or that the
controlling LIM unit is system busy or manual busy, a dot (.) indicates an
in-service tap, M indicates a manual-busy tap, I indicates an in-service
trouble tap, S indicates a system-busy tap, and a dash (-) indicates an
unequipped tap.
Go to step 9.
7 Access the LIS level of the MAP display by typing
>LIS lis_no
and pressing the Enter key.
where
lis_no
is the number of the link interface shelf (LIS): 1, 2, or 3
Example of a MAP display:
DMS-100 Family NA100 Recovery Procedures LET0015 and up
System level recovery procedures
Recovering a composite clock
Links_OOS Taps_OOS
2
.
OOS OOS_Taps
Links LIS1
2 12
. .
Tap: 0 4 8
BBBB BBBB BBBB BBBB
.M.. .I..S... ....
16
.
LIS2 LIS3
12 12
. .
Do
step 6
step 7
12 16 20 24
–––– –––– ––––
–––– –––– ––––
2-51
(continued)
28 32
B BB
––– ––
. ..
––– ––