Nortel DMS-100 Manual page 312

Recovery procedures for individual devices and services
6 To create the correct DIRP process (DIRPGI, DIRPDSON, or DIRPTSON),
type
>REVIVE ALL
and press the Enter key.
Note: The REVIVE command puts life back into the DIRP child process.
The command does not correct the problem that caused the death of the
DIRP child process.
7 Check the DIRP logs to determine if the REVIVE command created a new
process. Go to step 8.
8 For additional help, contact the next level of support.
9 The procedure is complete.
DMS-100 Family NA100 Recovery Procedures LET0015 and up
Recovering a dead DIRP utility
4-105
(end)