Nortel DMS-100 Manual page 61

2-14 System level recovery procedures
Booting a DMS switch
41
42
43
44
45
297-8021-545 Standard 14.02 May 2001
(continued)
where
user_name
is the name of the user for the account
Example of a MAP response:
Enter Password
To enter the password, type
>password
and press the Enter key.
where
password
is the password for the account
Example of a MAP response:
SuperNode1 Logged in on 1993/03/11 at 20:37:17.
To access the MS Clock level of the MAP display, type
>MAPCI;MTC;MS;CLOCK
and press the Enter key.
To synchronize the clocks, type
>SYNC
and press the Enter key.
If the SYNC command
passed
failed
To access the CM level of the MAP display, type
>CM
and press the Enter key.
Determine if the CPUs are in sync.
Note: A dot symbol under the Sync header indicates that the CPUs are in
sync. The word No indicates that the CPUs are not in sync.
If the CPUs
are in sync
are not in sync
Do
step 44
step 51
Do
step 52
step 46