Nortel DMS-100 Manual page 110

Recovering from a dead system in a SuperNode switch
At the operator MAP terminal
48
Determine if you have to log in.
Example of a MAP response:
Please Login.
49 Press the Break key.
MAP response:
?
50 To log in to the MAP terminal, type
>LOGIN
and press the Enter key.
MAP response:
Enter User Name
51 To enter the user name, type
>user_name
and press the Enter key.
where
MAP response:
Enter Password
WARNING
Extended service interruption
The exact login procedure depends on your office
configuration. If you need further assistance, contact the
personnel responsible for the next level of support.
Note: The message Please Login indicates that you must log in. Your
office parameters determine the login procedure. Your login can be
automatic.
If you
have to log in
are logged in automatically
user_name
is the name of the user for the account
DMS-100 Family NA100 Recovery Procedures LET0015 and up
System level recovery procedures
Do
step 49
step 53
2-63
(continued)