Nortel DMS-100 Manual page 306

5 Query the volumes that are in the subsystem. Determine the state of the
parallel volume. To query the volumes and to determine the state of the
parallel volume, type
>QUERY
and press the Enter key.
where
ssys
Example of a MAP display:
SSNAME SSNO SEQNO ROTATES POOLNO PARLPOOL EMERGENCY
AMA 0 1
REGULAR
VOL# VOLUMNAME STATE
PARALLEL VOLUMES(S)
VOL# VOLNAME STATE
0 D00AMA2 READY
If
If the parallel volume that you
want to recover data from
is the current device
is not the current device
6 Determine if parallel volumes are available.
If
If parallel volumes
are available
are not available
7 Add a new disk volume.
Refer to Setting up parallel recording on disk in the DIRP utility in Routine
Maintenance Procedures , and return to this point.
Recovery procedures for individual devices and services
Recovering data from a disk to tape
ssys VOLUMES
is the affected subsystem
2 0
IOC CARD
IOC CARD VOL
0 0
DMS-100 Family NA100 Recovery Procedures LET0015 and up
6 No
VOL FSEG ROOM
FSEG ROOM VLID
0 N/A 1 2400
Do
Do
step 6
step 11
Do
Do
step 8
step 7
4-99
(continued)
VLID FILES
CURR
YES