Nortel DMS-100 Manual page 302

Recovery procedures for individual devices and services
22
To clear the link, type
>CLEAR session#
and press the Enter key.
where
session#
is the session# on the link to clear
Example of a MAP terminal response:
Active session:
(Yes or No)?
23 To respond to the prompt, type
>YES
and press the Enter key.
If the link
cleared
did not clear
24 For additional help, contact the next level of support.
25 The SCAI link is clear. If CompuCALL did not recover, contact operating
company personnel. Inform operating company personnel that a problem
occurred with customer premises equipment.
DMS-100 Family NA100 Recovery Procedures LET0015 and up
Recovering CompuCALL
WARNING
If you close the link, communications that use the link will close.
If you issue the CLEAR command from the SCAIX25 MAP
terminal level, the command ends the CompuCALL session.
The link does not close.
Do you really want to clear
Do
step 25
step 24
4-95
(end)