5 Emergency power conservation
recovery procedures
Introduction to emergency power conservation recovery procedures
This chapter contains procedures for performing emergency power
conservation recovery tasks for the DMS-100 switch. For each recovery task,
you will find a procedure containing
•
•
•
Explanatory and context-setting information
The first page of each procedure contains the following headings:
•
•
Summary flowchart
The flowchart is only a summary of the main actions, decision points, and
possible paths you may take. Do not use the summary flowchart to perform
the procedure. Instead, use it to preview what you will be doing and to prepare
for it. For example, if you see that these instructions involve another office,
you will know to advise that office before you begin the step-action
instructions.
Step-action instructions
The step-action instructions tell you how to perform the recovery task.
Normally you will perform the steps in order, but you may be directed to return
to a previous step and repeat a sequence. The successful completion of a step
may depend on previous steps; therefore, always perform the steps in the order
specified.
The step-action instructions provide the command syntax and system
information you use or see while performing the procedure. For help on DMS
explanatory and context-setting information
information
step-action instructions
Application (when to use the procedure)
Action (how to use the flowchart and step-action instructions)
DMS-100 Family NA100 Recovery Procedures LET0015 and up
5-1