Nortel DMS-100 Manual page 217

4-10 Recovery procedures for individual devices and services
Checking for call completion
26
27
28
29
297-8021-545 Standard 14.02 May 2001
(continued)
Reset the HLIU by typing
>PMRESET
and pressing the Enter key.
If the PMRESET command
passed, and the HLIU is ISTb
or InSv
passed, and the HLIU is ManB
failed, and the HLIU is ManB
Reload the HLIU by typing
>LOADPM
and pressing the Enter key.
If the LOADPM command
passed
failed
Return the HLIU to service by typing
>RTS
and pressing the Enter key.
If the RTS command
passed
failed
Post the HSLR by typing
>POST HSLR liu_no
and pressing the Enter key.
where
liu_no
is the number of the HSLR (0 to 511) associated with the link you
chose in step 12
If the state of the HSLR is
SysB or OffL
ManB
InSv
Do
step 29
step 28
step 27
Do
step 28
step 50
Do
step 29
step 50
Do
step 30
step 31
step 36