Performing A Reload-Restart - Nortel DMS-100 Manual

2-30 System level recovery procedures

Performing a reload-restart

Application
Use this procedure to perform a reload-restart on a DMS SuperNode or DMS
SuperNode SE switch. Perform this procedure as instructed by the next level
of support.
A reload-restart is more severe than a cold restart. A reload-restart simulates
a reload of the current software into the switch. All calls drop during the
restart, and billing data does not record for these calls. Office configuration
and translation data remain.
Action
This procedure contains a summary flowchart and a list of steps. Use the
flowchart to review the procedure. Follow the steps to perform the procedure.
297-8021-545 Standard 14.02 May 2001