Failed Step; Determine If Traffic Is Running On The Link By Typing; Querytrf; And Pressing The Enter Key - Nortel DMS-100 Manual

Recovery procedures for individual devices and services
Checking for message throughput
45 Activate the link by typing
>ACT link_no

and pressing the Enter key.

where
link_no
is the number of the link (0 to 15)
link_no
is the number of the link (0 to 7)
If the ACT command
passed
failed
46 Return the link to service by typing
>RTS link_no
and pressing the Enter key.
where
link_no
is the number of the link (0 to 15)
link_no
is the number of the link (0 to 7)
If the RTS command
passed
failed
47 To uninhibit the link from traffic flow, type
>UINH link_no
and pressing the Enter key.
where
link_no
is the number of the link (0 to 15)
link_no
is the number of the link (0 to 7)
If the INH command
passed
failed
48 Determine if traffic is running on the link by typing
>QUERYTRF
DMS-100 Family NA100 Recovery Procedures LET0015 and up
link_no
Do
step 46
step 54
Do
step 47
step 54
Do
step 48
step 54
4-27
(continued)