Nortel DMS-100 Manual page 127

2-80 System level recovery procedures
Recovering from a dead system in a SuperNode switch
SSNAME SSNO SEQNO ROTATES POOLNO PARLPOOL EMERGENCY
AMA
REGULAR
FILE(S) STATE VOLUME RECCOUNT BLOCK E V V_B VLID FNUM FRN#
ACTIVE
STANDBY1
PARALLEL
FILE
REGULAR VOLUME(S)
VOL# VOLNAME
REGULAR SPACE
157
158
297-8021-545 Standard 14.02 May 2001
0 1
NONE
NONE
STATE VOLUME
NONE
STATE
If
the word NONE under the
STATE header on the MAP dis-
play indicates that the volumes
are not allocated.
any volume is IN ERROR, as in-
dicated under the REGULAR
VOLUME(S) header on the
MAP display
all volumes are READY,as indi-
cated under the REGULAR
VOLUME(S) header on the
MAP display
To reset any volumes IN ERROR, type
>RSETVOL vol_name
and press the Enter key.
where
vol_name
is the name of the volume to be reset
If the RSETVOL command
passed
failed
Perform the Allocating recording volumes in the DIRP utility procedure in
Routine Maintenance Procedures . Complete this procedure and return to
this point.
6 9 62 ***YES***
BLOCK E V V_B VLID FNUM FRN#
IOC CARD VOL FSEG ROOM VLID FILES
Do
step 158
step 157
step 159
Do
step 159
step 183
(continued)