Nortel DMS-100 Manual page 214

Recovery procedures for individual devices and services
Linkset SSP100_LK
Traf Sync
Link
LK Stat Stat Resource
0 SysB SysB LIU7 101
1 SysB SysB LIU7 103
2 SysB SysB DLIU 300
Size of Posted Set = 3
Note: Where the link interface unit is an MLIU, MLIU is shown in the MAP
display in place of LIU7.
11 Determine which links are out of service.
12 Choose an out-of-service link.
If the link is
an LIU7 or a DLIU that is InSv or ISTb
an LIU7 that is ManB, SysB, or OffL
a DLIU that is ManB, SysB, or OffL
anything else
13 Access the PM level of the MAP display by typing
>PM
and pressing the Enter key.
14 Post the LIU7 or MLIU by typing
>POST LIU7
or
>POST MLIU
and pressing the Enter key.
where
liu_no or mliu_no
is the number of the LIU7 or MLIU (0 to 511) associated with the link
you chose in step 12
If the state of the LIU7 or MLIU is
SysB or OffL
ManB
15 Force the LIU7 or MLIU to busy by typing
>BSY FORCE
DMS-100 Family NA100 Recovery Procedures LET0015 and up
Checking for call completion
SYSB
Stat Physical Access
SysB DS0A
SysB DS0A
SysB DS1
liu_no
mliu_no
Do
step 15
step 16
4-7
(continued)
Stat Action
Do
step 39
step 13
step 21
step 48