Performing A Warm Restart - Nortel DMS-100 Manual

Application
Use this procedure to perform a warm restart on a DMS SuperNode or DMS
SuperNode SE switch. Perform this procedure as instructed by the next level
of support.
A warm restart is the least severe type of restart. A warm restart is an
initialization phase during which temporary storage deallocates and clears.
Calls in the talking state continue during the restart. Data associated with each
call remains. Calls that do not reach the talking state disconnect.
Action
This procedure contains a flowchart and a list of steps. Use the flowchart to
review the procedure. Follow the steps to perform the procedure.
DMS-100 Family NA100 Recovery Procedures LET0015 and up
System level recovery procedures 2-39

Performing a warm restart