Nortel DMS-100 Manual page 198

Recovering link peripheral processors
where
vpu_nos
are the numbers of the system-busy VPUs (0 to 215)
Note: Use a space to separate each number.
Example input:
>POST VPU
71 To manually busy the VPUs in the posted set, type
>BSY ALL
and press the Enter key.
72 To load the posted VPU, type
>LOADPM
and press the Enter key.
If the LOADPM command
passed
failed
73 To return the VPU to service, type
>RTS
and press the Enter key.
If the RTS command
passed, but not all VPUs in the
posted set are in service
passed and all VPUs in the post-
ed set are in service
failed
74 To display the next VPU in the posted set, type
>NEXT
and press the Enter key.
Go to step 72.
75 To post the system-busy XLIUs that failed to recover, type
>POST XLIU
and press the Enter key.
where
xliu_nos
are the numbers of the system busy XLIUs (0 to 511)
DMS-100 Family NA100 Recovery Procedures LET0015 and up
Node level recovery procedures
101 102 103
FORCE
xliu_nos
104 105 106 107
Do
step 73
step 85
Do
step 74
step 18
step 85
3-31
(continued)
108