Nortel DMS-100 Manual page 293

4-86 Recovery procedures for individual devices and services
Recovering CCS7 linksets
38
39
40
297-8021-545 Standard 14.02 May 2001
(continued)
Note: For DLIU links, in the Cell/sec and CPU Occ fields, a value of 0
(zero) means that no traffic is running, and a value greater than zero
means that traffic is running. In this example, traffic is running on the link.
If traffic on the link is
running, and the linkset is InSv
or ISTb
running, and the linkset is out of
service
not running
You have restored traffic to the link, but the linkset is still out of service.
Contact the far-end office. Tell far-end personnel that you have in-service or
in-service trouble links, and that the associated linkset is out of service.
Go to step 41.
Wait until the next query traffic snapshot. In the Example of a MAP response
in step 37, the next snapshot is at 14:30.
To determine if the traffic has begun to run on the link, type
>QUERYTRF link_no
and press the Enter key.
where
link_no
is the number of the link in the linkset (0 to 15)
link_no
is the number of the link in the linkset (0 to 7)
Example of a MAP response:
QueryTrf: Link occupancy for 14:00:00 – 14:30:00
Link Speed Byte/sec
0 7000
If traffic on the link is
running, and the linkset is InSv
or ISTb
running, and the linkset is out of
service
not running
Do
step 41
step 38
step 39
Erlang MSU len
52 0.40
Do
step 41
step 38
step 44
%RTx Msg/sec
28 0 128