Nortel DMS-100 Manual page 176

Recovering the enhanced network
At the MAP terminal
29 To mount the tape, type
>INSERTTAPE
and press the Enter key.
where
device_name
is S00T if you are working on SLM 0, or S01T if youare working on
SLM 1
Example of a MAP response:
The INSERT operation may take up to 5 minutes to tension
the tape.
30 To list the files on the backup tape, type
>LISTFL device_name
and press the Enter key.
where
device_name
is S00T or S01T
31 To copy the file from tape to disk, type
>RESTORE FILE
file_name
and press the Enter key.
where
disk_volume_name
is the name of the SLM disk (S00D or S01D) and the name of the
volume on the disk (for example, S00DENET)
tape_device_name
is S00T if you are working on SLM 0, or S01T if youare working on
SLM 1
file_name
is the image file name
32 To list the files on the volume to confirm that the ENET image file is present,
type
>LISTFL disk_volume_name
and press the Enter key.
where
disk_volume_name
is the name of the SLM disk (S00D or S01D) and the name of the
volume on the disk (for example, S00DENET)
DMS-100 Family NA100 Recovery Procedures LET0015 and up
Node level recovery procedures
device_name
disk_volume_name
(continued)
tape_device_name
3-9