Nortel DMS-100 Manual page 173

3-6 Node level recovery procedures
Recovering the enhanced network
10
11
12
13
14
15
16
17
18
297-8021-545 Standard 14.02 May 2001
Perform the procedure in Alarm and Performance Monitoring Procedures to
clear an IOD SLM bsy major alarm. Complete the procedure and return to
this point.
Go to step 14.
Perform the procedure in Alarm and Performance Monitoring Procedures to
clear an IOD SLM bsy minor alarm. Complete the procedure and return to
this point.
Go to step 14.
Perform the procedure in Alarm and Performance Monitoring Procedures to
clear an IOD SLM off minor alarm. Complete the procedure and return to this
point.
Go to step 14.
Perform the procedure in Alarm and Performance Monitoring Procedures to
clear an IOD SLM tbl minor alarm. Complete the procedure and return to this
point.
Go to step 14.
To access the CI level of the MAP display, type
>QUIT ALL
and press the Enter key.
To access the disk utility level of the MAP display, type
>DISKUT
and press the Enter key.
Example of a MAP response:
Disk utility is now active.
DISKUT:
To list the volumes on the SLMs, type
>LISTVOLS CM
and press the Enter key.
Record the SLM volume name.
To list the files in the SLM volume on the in-service SLM, type
>LISTFL disk_volume_name
and press the Enter key.
where
disk_volume_name
is the name of the SLM disk (S00D or S01D) and the name of the SLM
volume on the disk (for example, S00DENET)
Example of a MAP response:
(continued)