Nortel DMS-100 Manual page 193

3-26 Node level recovery procedures
Recovering link peripheral processors
47
48
49
50
297-8021-545 Standard 14.02 May 2001
and press the Enter key.
If the RTS command
passed, but not all HLIUs in the
posted set are in service
passed and all HLIUs in the
posted set are in service
failed
To display the next HLIU in the posted set, type
>NEXT
and press the Enter key.
Go to step 45.
To post the system-busy HSLRs that failed to recover, type
>POST HSLR liu_nos
and press the Enter key.
where
liu_nos
are the numbers of the system-busy HSLRs (0 to 511)
Note: Use a space to separate each HSLR number.
Example input
>POST HSLR 101
To manually busy the HSLRs in the posted set, type
>BSY ALL FORCE
and press the Enter key.
If the response is
Link link_no:Traffic
is running
link
Please
("YES","Y","NO",
"N"):
anything else including addi-
tional messages with above re-
sponse
To confirm the command, type
>YES
(continued)
Do
step 47
step 18
step 85
102 103 104
Do
step 50
on that
confirm
or
step 85
105 106 107 108