Recovering Data From A Disk To Tape - Nortel DMS-100 Manual

4-96 Recovery procedures for individual devices and services

Recovering data from a disk to tape

Application
Use this procedure to recover a disk-type file that consists of detected errors.
The detection of errors occurs during a data-link transmission to a data center.
To recover the file, this procedure copies the file from disk to tape. You can
transport the tape file to the data center.
Action
The following flowchart is a summary of the procedure. Use the instructions
in the step-action procedure that follows the flowchart to perform the recovery
task.
297-8021-545 Standard 14.02 May 2001