Nortel DMS-100 Manual page 393

5-44 Emergency power conservation recovery procedures
Emergency power conservation
Restoring the line modules to duplex operation
10
11
12
13
297-8021-545 Standard 14.02 May 2001
frame
is the frame number (00 to 99)
pair
is the frame pair number (0 to 1)
Example of a MAP response:
LM HOST 00 0 ManB
To load the PM, type
>LOADPM
and press the Enter key.
To return the PM to service, type
>RTS
and press the Enter key.
Repeat steps 1 to 11 for each line module controller that you power down to
conserve emergency power.
Return to the procedure Emergency power conservation—Restoration in this
document. Proceed when the step-action procedure directs you to go.
(end)