Nortel DMS-100 Manual page 324

Recovery procedures for individual devices and services
Recovering a stuck HLIU or HSLR
TAP #1 OOS/NA
LMS States : InSv
Auditing : No
Msg Channels: Acc
TAP 0 : I (NA)
Reserved HLIU forms part of CCS7 Linkset :HSL172001000 SLC:0
LIU is not allocated
6 Post the LIM associated with the stuck HLIU or HSLR by typing
>POST LIM
and pressing the Enter key.
where
lim_no
is the number of the LIM (0 to 16)
7 Post the LIS associated with the stuck HLIU or HSLR by typing
>POST LIS
and pressing the Enter key.
where
lis_no
is the number of the shelf (1 to 3)
8 Determine which F-bus taps are associated with the stuck HLIU or HSLR by
typing
>TRNSL fbus_no
and pressing the Enter key.
where
fbus_no
is the number of the F-bus (0 or 1)
Example of a MAP response for HLIU:
LIM 8 LIS 2 FBus 0 Tap 0 is unequipped.
LIM 8 LIS 2 FBus 0 Tap 1 is unequiped
LIM 8 LIS 2 FBus 0 Tap 2 is on HLIU 1
LIM 8 LIS 2 FBus 0 Tap 3 is on HSLR 1
LIM 8 LIS 2 FBus 0 Tap 4 is unequipped
9 Manually busy the F-bus taps associated with the stuck HLIU or HSLR by
typing
>BSY FBUS
and pressing the Enter key.
where
fbus_no
is the number of the F-bus (0 or 1)
tap_no
is the number of the F-bus tap (0 to 11)
DMS-100 Family NA100 Recovery Procedures LET0015 and up
InSv
No
No
S (NA)
lim_no or
lis_no
fbus_no tap_no
4-117
(continued)