Nortel DMS-100 Manual page 245

4-38 Recovery procedures for individual devices and services
MP position (standalone)
recovery
(continued)
4
5
6
297-8021-545 Standard 14.02 May 2001
POSITION STATUS/CONTROL
1. Bsy
2. RTS
3. OffL
4. RTS ALL POSITIONS
POSITION NUMBER
0.
1.
2.
3.
MAKE CHOICE:
Examine the status line to determine if any MP position is SysB.
If MP position
is SysB
is InSv
To busy the MP position(s), type:
>1
and press the Enter key.
>n
and press the Enter key.
where
n
is the MP position number (0, 1, 2, or 3)
Note: Repeat this step until you return to service all positions that apply.
To return the MP position(s) to service, type:
>2
and press the Enter key.
>n
and press the Enter key.
where
n
is the MP position number (0, 1, 2, or 3)
STATUS
SysB
SysB
InSv
SysB
Do
step 5
step 17
CARD PRESENT
YES
YES
YES
YES