Restoring The Elpp Lim To Duplex Operation - Nortel DMS-100 Manual

5-18 Emergency power conservation recovery procedures
Emergency power conservation

Restoring the ELPP LIM to duplex operation

Application
Use this procedure to restore to duplex operation the link interface module
(LIM) in each enhanced link peripheral processor (ELPP). Perform this
procedure after you power down one unit of the LIM to conserve emergency
power.
Use this procedure to restore the ELPP LIM to duplex operation only if the
following conditions are met:
•
•
Action
The following flowchart is a summary of the procedure. Use the instructions
in the step-action procedure that follow the flowchart to clear the alarm.
297-8021-545 Standard 14.02 May 2001
The equipment was in normal in-service operation before being shutdown.
Procedure Emergency power conservation—Shutdown in this document
was used to remove equipment from service.