Nortel DMS-100 Manual page 93

2-46 System level recovery procedures
Performing a warm restart
24
25
26
At the CM reset terminal for the INACTIVE CPU
27
At the MAP terminal
28
29
297-8021-545 Standard 14.02 May 2001
(continued)
Determine if the CPUs are in sync.
Note: A dot symbol under the Sync header indicates that the CPUs are in
sync. The word No indicates that the CPUs are not in sync.
If the CPUs
are in sync
are not in sync
Contact the next level of support to determine if you can synchronize the
CPUs.
If you
can synchronize the CPUs
cannot synchronize the CPUs
Determine if the inactive CPU jammed.
Note: The word yes under the Jam header indicates that the CPU
jammed. The area is blank if the CPU did not jam.
If the inactive CPU
jammed
did not jam
To release the jam on the inactive CPU, type
>\RELEASE JAM
and press the Enter key.
RTIF response:
JAM RELEASE DONE
To synchronize the CPUs, type
>SYNC
and press the Enter key.
If the SYNC command
passed
failed
For additional help, contact the next level of support.
Do
step 30
step 25
Do
step 26
step 30
Do
step 27
step 28
Do
step 30
step 29