Nortel DMS-100 Manual page 189

3-22 Node level recovery procedures
Recovering link peripheral processors
28
29
30
31
32
33
297-8021-545 Standard 14.02 May 2001
fbus_no
is the number of the F-bus (0 or 1) that returns to service
If the RTS command
passed
failed
If the other F-bus is system busy, repeat steps 26 and 27 for the other F-bus.
When both of the F-buses are in-service, go to step 18.
Select a system-busy NIU to work on.
To post the system-busy NIU, type
>POST NIU niu_no
and press the Enter key.
where
niu_no
is the number of the NIU (0 to 29)
To manually busy one of the units of the affected NIU, type
>BSY UNIT unit_no FORCE
and press the Enter key.
where
unit_no
is the unit number of the NIU unit (0 or 1)
To load the NIU unit, type
>LOADPM UNIT unit_no
and press the Enter key.
where
unit_no
is the unit number of the busy unit (0 or 1)
If the LOADPM command
passed
failed
To return the NIU to service, type
>RTS UNIT unit_no
and press the Enter key.
where
(continued)
Do
step 28
step 85
Do
step 33
step 85