Nortel DMS-100 Manual page 311

4-104 Recovery procedures for individual devices and services
Recovering a dead DIRP utility
Recovering a dead DIRP utility
At the MAP terminal
1
2
3
4
DIRP101 AUG13 19:50:33 nnnn INFO_DIRP_FLOW_LOG REASON= 60 SSYS#=0
SSNAME= AMA POOL#= 0 VOLUME#= # 22 SOS–FILE–ID= nnnn nnnn nnnn
TEXT1= COULDN'T RECREATE DIRGI AFTER DEATH PARM1= operatingsys. RC
TEXT2=
DIRP101 AUG13 19:50:33 nnnn INFO_DIRP_FLOW_LOG REASON= 61 SSYS#=0
SSNAME= AMA POOL#= 0 VOLUME#= # 22 SOS–FILE–ID= nnnn nnnn nnnn
TEXT1= DIRGI NOT RECREATED, DIED TWICE<30secs PARM1= operatingsys. RC
TEXT2=
5
297-8021-545 Standard 14.02 May 2001
(continued)
CAUTION
Loss or damage of AMA data
Use this procedure and follow it exactly. Not doing so will
lose or corrupt automatic message accounting (AMA)
data. The operating company uses AMA data to produce
billings. Loss or damage of AMA data results in revenue
loss for the operating company.
To silence an audible alarm, type
>MTC;SIL
and press the Enter key.
To access the DIRP level of the MAP display, type
>MAPCI;MTC;IOD;DIRP
and press the Enter key.
To enable the printer, type
>RECORD START ONTO
and press the Enter key.
where
device
is the printer type
To access the DIRP logs, type
>LOGUTIL;OPEN DIRP
and press the Enter key.
Example of a MAP response:
Check the DIRP logs to determine the DIRP process that died.
device
PARM2= hhh
PARM2= hhh