Recovery Procedures For Individual Devices And Services; Introduction To Recovery Procedures For Individual Devices And Services; Explanatory And Context-Setting Information; Summary Flowchart - Nortel DMS-100 Manual

4 Recovery procedures for individual
devices and services
Introduction to recovery procedures for individual devices and
services
This chapter contains procedures for performing recovery tasks for individual
devices and services for recovery tasks for the DMS-100 switch. For each
recovery task, you will find a procedure containing
•
•
•

Explanatory and context-setting information

The first page of each procedure contains the following headings:
•
•
Summary flowchart
The flowchart is only a summary of the main actions, decision points, and
possible paths you may take. Do not use the summary flowchart to perform the
procedure. Instead, use it to preview what you will be doing and to prepare for
it. For example, if you see that these instructions involve another office, you
will know to advise that office before you begin the step-action instructions.

Step-action instructions

The step-action instructions tell you how to perform the recovery task.
Normally you will perform the steps in order, but you may be directed to return
to a previous step and repeat a sequence. The successful completion of a step
may depend on previous steps; therefore, always perform the steps in the order
specified.
The step-action instructions provide the command syntax and system
information you use or see while performing the procedure. For help on DMS
explanatory and context-setting information
information
step-action instructions
Application (when to use the procedure)
Action (how to use the flowchart and step-action instructions)
DMS-100 Family NA100 Recovery Procedures LET0015 and up
4-1