Nortel DMS-100 Manual page 428

Restoring a SuperNode SE ENET to duplex operation
Restoring a SuperNode SE ENET to duplex operation
At the ENET shelf
1
Make sure that the cooling fans for the ENET cabinet operate.
2 The next action depends on which ENET plane you powered down to
conserve power.
If you shut down
plane 0 of a 16k ENET
plane 1 of a 16k ENET
Either plane of a 32K ENET
Emergency power conservation recovery procedures
Emergency power conservation
WARNING
Potential extended equipment outage
Nortel recommends that you contact the Emergency
Technical Assistance Services (ETAS) to expedite recovery
of equipment.
WARNING
Potential loss of service or extended outage
This procedure restores normal operation after you perform
emergency power conservation measures. Do not use this
procedure or sections of this procedure for equipment
maintenance purposes.
WARNING
Static electricity damage
Wear a wrist strap that connects to the wrist-strap grounding
point of a frame supervisory (FSP) or a modular supervisory
panel (MSP) to handle circuit cards. The strap protects the
cards against static electricity damage.
DMS-100 Family NA100 Recovery Procedures LET0015 and up
Do
step 3
step 5
step 7
5-79
(continued)