Nortel DMS-100 Manual page 533

5-182 Emergency power conservation recovery procedures
Emergency power conservation
Emergency shutdown of one unit of MSB7s
10
11
12
13
14
297-8021-545 Standard 14.02 May 2001
LINK 0: NET 0 3 12;CAP MS;Status:OK
LINK 1: NET 1 3 12;CAP MS;Status:OK
LINK 2: NET 0 3 28;CAP MS;Status:OK
LINK 3: NET 1 3 28;CAP MS;Status:OK
LINK 4: NET 0 3 44;CAP MS;Status:OK
...
LINK 31 NET 1 3 63;CAP MS;Status:OK
Note: Links 5 to 30 do not appear.
Example of a MAP response for ENET:
LINK 0: ENET 0 0 13 00;CAP MS;Status:OK
LINK 1: ENET 1 0 23 00;CAP MS;Status:OK
LINK 2: ENET 0 0 13 01;CAP MS;Status:OK
LINK 3: ENET 1 0 23 01;CAP MS;Status:OK
LINK 4: ENET 0 0 13 02;CAP MS;Status:OK
LINK 5: ENET 1 0 23 02;CAP MS;Status:OK
LINK 6: ENET 0 0 13 03;CAP MS;Status:OK
LINK 7: ENET 1 0 23 03;CAP MS;Status:OK
Determine if the network on your switch is a junctored network (JNET) or
enhanced network (ENET).
If the network
is JNET
is ENET
Determine the MSB7 unit that is manual busy (0 or 1). Record the speech
link numbers (0 to 31) that associate with the MSB7 unit. Even numbered
speech links (0, 2, 4 ... 30) associate with MSB7 unit 0. Odd numbered
speech links (1, 3, 5 ... 31) associate with MSB7 unit 1.
Note: Speech link numbers 5 to 30 do not appear in the example in step 9.
Record the network plane number, network module (pair) number, and
network link number for each speech link recorded in step 11.
Note: Speech link 2 associates with network plane 0, network module
number 3, and network link number 28. This association appears in the
JNET example response in step 9.
To access the NET level of the MAP display, type
>NET
and press the Enter key.
To access the network link level for the first network link that you will busy,
type
>LINKS n
and press the Enter key.
(continued)
Do
step 11
step 18