Nortel DMS-100 Manual page 131

2-84 System level recovery procedures
Recovering from a dead system in a SuperNode switch
At the MAP terminal
174
175
176
177
297-8021-545 Standard 14.02 May 2001
To synchronize the CPUs, type
>SYNC
and press the Enter key.
If the response indicates
the SYNC command was suc-
cessful
The CPUs are out of
sync due to a problem
with mismatches.
mismatch logs
be analyzed
re-syncing.Do you wish
to continue?
Please Confirm("YES",
"Y", or "NO", "N")
(SuperNode and SuperNode SE
series 70 only)
other than listed here
(SuperNode and SuperNode SE series 70 only)
To deny the action, type
>NO
and press the enter key.
Go to step 183.
To turn off priority, type
>PRIORITY OFF
and press the Enter key.
To access the SRSTATUS level of the MAP display, type
>MAPCI;MTC;SRSTATUS
and press the Enter key.
Example of a MAP display:
Do
step 176
step 175
The
should
before
step 183
(continued)