Nortel DMS-100 Manual page 75

Hide thumbs Also See for DMS-100:
Table of Contents

Advertisement

2-28 System level recovery procedures
Performing a cold restart
25
26
At the CM reset terminal for the INACTIVE CPU
27
At the MAP terminal
28
297-8021-545 Standard 14.02 May 2001
(continued)
Determine from the next level of support if you can synchronize the CPUs.
If you
can synchronize the CPUs
cannot synchronize the CPUs
Determine if the inactive CPU jammed.
Note: The word yes under the Jam header indicates that the CPU
jammed. The area is blank if the CPU did not jam.
If the inactive CPU
jammed
did not jam
To release the jam on the inactive CPU, type
>\RELEASE
JAM
and press the Enter key.
RTIF response:
JAM RELEASE DONE
To synchronize the CPUs, type
>SYNC
and press the Enter key.
If the response
indicates the SYNC command
passed
indicates a problem with mis-
matches makes the CPUs not in
sync. Analyze the mismatch logs
before you sync again.
Do you wish to contin-
ue?
Please Confirm("YES",
"Y", or "NO", "N")
is other than listed here
Do
step 26
step 31
Do
step 27
step 28
Do
step 31
step 29
step 30

Advertisement

Table of Contents
loading

Table of Contents