Application
Use this procedure to restore the message switch (MS) to duplex operation.
Perform this procedure to conserve emergency power after you power down
one plane of the MS.
The procedure assumes Emergency power conservation—Shutdown in this
document to remove equipment from service. Equipment must be in normal
in-service operation before the need to perform the procedure for emergency
power conservation arises.
Action
The procedure contains a flowchart and a list of steps. Use the flowchart to
review the procedure. Follow the steps to perform the procedure.
Emergency power conservation recovery procedures 5-53
Emergency power conservation
Restoring the MS to duplex operation
DMS-100 Family NA100 Recovery Procedures LET0015 and up