To Configure The Modem; To Configure Telephony Services; To Initialize Voice Mail - Nortel BCM50 Installation And Maintenance Manual

If the Obtain IP address dynamically checkbox is not selected, you must enter values for IP
address, IP subnet mask, and Default gateway.
6 Click Ok.

To configure the modem

1 From the Configuration tab, double-click the Administrator Access folder to expand it.
2 Select Dial-out (or Dial-in) from the Administrator Access folder.
3 Select or deselect the Enable modem checkbox depending on your system requirements.
For more information on modem configuration refer to BCM50 Administration Guide
(N0xxxxxxx).

To configure telephony services

1 From the Administration tab, double-click the Utilities folder to expand it.
2
Select Reset from the Utilities folder.
3
Click Cold Reset Telephony Services. The Cold Reset Telephony dialog box displays.
4
Select your system region from the Region dropdown list.
5 Select a template from the Template dropdown list.
6 Enter the starting DN in the Start DN field.
7 Click Ok.
For DID lines, you can set the public received numbers and private received numbers by going to
the Configuration tab, and selecting Telephony > Lines > Target Lines. Then select the DID line to
modify and modify the displayed fields.

To initialize voice mail

1 From the Configuration tab, double-click Applications folder to expand it.
2 Select Voice Messaging/Call Center from the Applications folder.
3 Click Launch CallPilot Manager. The Quick Install Wizard webpage displays.
If you VoiceMail system is already initialized, you will not see the Quick Install Wizard.
Instead you will see the System Properties web page.
4
Complete the Quick Install Wizard form.
5
Click Install.
Configure the initial parameters
Use Element Manager to set the basic parameters
163