D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 96

DGS-3324SRi:4#
show stp ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show stp ports 1 through 9 on switch one:
DGS-3324SRi:4#show stp ports 1:1-1:9
Command: show stp ports 1:1-1:9
MSTP Port Information
----------------------
Port Index
External PathCost : Auto/200000 , Edge Port : No /No , P2P : Auto /Yes
Msti Designated Bridge
----- ------------------
0 8000/0050BA7120D6
1 8001/0053131A3324
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
show stp instance_id
Purpose
Syntax
Description
Parameters
Restrictions
xStack Gigabit Layer 3 Switch Command Line Interface Manual
Used to display the Switch's current instance_id configuration.
show stp ports <portlist>
This command displays the STP Instance Settings and STP
Instance Operational Status currently implemented on the Switch.
<portlist> − Specifies a range of ports to be viewed. The port list
is specified by listing the lowest switch number and the beginning
port number on that switch, separated by a colon. Then the
highest switch number, and the highest port number of the range
(also separated by a colon) are specified. The beginning and end
of the port list range are separated by a dash. For example, 1:3
specifies switch number 1, port 3. 2:4 specifies switch number 2,
port 4. 1:3-2:4 specifies all of the ports between switch 1, port 3
and switch 2, port 4 − in numerical order.
None.
: 1:1 , Hello Time: 2 /2 ,
Internal PathCost Prio
-----------------
200000
200000
Used to display the Switch's STP instance configuration
show stp instance_id <value 0-15>
This command displays the Switch's current STP Instance
Settings and the STP Instance Operational Status.
<value 0-15> - Enter a value defining the previously configured
instance_id on the Switch. An entry of 0 will display the STP
configuration for the CIST internally set on the Switch.
None.
Port STP enabled
Status
---- ----------
128 Forwarding
128 Forwarding
88
Role
----------
Root
Master