D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 26

Example usage:
To show the current hardware status of the Switch:
DGS-3324SRi:4#show device_status
Command: show device_status
ID
---
2
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
show module_info
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view information concerning the DEM-420X optional module added to an xStack switch.
DXS-3326GSR:4#show module_info
Command: show module_info
Box
ID
------
1
2
xStack Gigabit Layer 3 Switch Command Line Interface Manual
Internal Power External power
---------------- ----------------
Active Fail
To show information concerning the added uplink module.
show module_info
This command is used to view information about the DEM-420X
uplink module added to an xStack switch. Currently, only the DXS-
3326GSR and the DXS-3350SR members of the xStack family have
the capability to add the optional DEM-420X module. Although the
DGS-3324SR and the DGS-3324SRi do not support the optional
module, information about the module can be viewed on these
switches if they are stacked with one of the switches that support the
optional module.
The following explains what is presented in the window:
Box ID – The ID of the switch in the switch stack.
Module Name – The name of the optional module. Currently,
switches in the xStack family only support the DEM-420X optional
module.
Rev. – The hardware revision of the optional module.
Serial No. – The serial number associated with this particular
optional module.
Description – A brief description of the optional module including
port count and module type.
None.
None.
Module Name Rev.
------------------ -------
DEM420X 2A1
- -
Side Fan Back Fan
---------- ----------
OK
Serial Description
No.
--------- -------------------------------------------
123456789 2-Port 10GE XFP Uplink Module
- -
18
OK