enable vrrp
Restrictions
Example Usage:
To enable VRRP globally on the Switch:
Example usage:
To enable the virtual IP address to be pinged:
disable vrrp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the VRRP function globally on the Switch:
xStack Gigabit Layer 3 Switch Command Line Interface Manual
Only administrator-level users can issue this command.
DGS-3324SRi:4#enable vrrp
Command: enable vrrp
Success.
DGS-3324SRi:4#
DGS-3324SRi:4#enable vrrp ping
Command: enable vrrp ping
Success.
DGS-3324SRi:4#
To disable the VRRP function on the Switch.
disable vrrp {ping}
This command will disable the VRRP function on the Switch.
{ping} - Adding this parameter to the command will stop the virtual IP
address from being pinged from other host end nodes to verify
connectivity. This will only disable the ping connectivity check
function. To disable the VRRP protocol on the Switch, omit this
parameter.
Only administrator-level users can issue this command.
DGS-3324SRi:4#disable vrrp
Command: disable vrrp
Success.
DGS-3324SRi:4#
266