D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 336

To configure the OSPF virtual interface settings:
DGS-3324SRi:4#config ospf virtual_link 10.1.1.2 20.1.1.1 hello_interval 10
Command: config ospf virtual_link 10.1.1.2 20.1.1.1 hello_interval 10
Success.
DGS-3324SRi:4#
delete ospf virtual_link
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example:
To delete an OSPF virtual interface from the Switch:
show ospf virtual_link
Purpose
Syntax
Description
xStack Gigabit Layer 3 Switch Command Line Interface Manual
Used to delete an OSPF virtual interface.
delete ospf virtual_link <area_id> <neighbor_id>
This command will delete an OSPF virtual interface from the
Switch.
<area_id> − A 32-bit number in the form of an IP address
(xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the
OSPF domain.
<neighbor_id> − The OSPF router ID for the remote area. This is
a 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx)
that uniquely identifies the remote area's Area Border Router.
The router ID of the neighbor router.
Only administrator-level users can issue this command.
DGS-3324SRi:4#delete ospf virtual_link 10.1.12 20.1.1.1
Command: delete ospf virtual_link 10.1.12 20.1.1.1
Success.
DGS-3324SRi:4#
Used to display the current OSPF virtual interface configuration.
show ospf virtual_link {<area_id> <neighbor_id>}
This command will display the current OSPF virtual interface
configuration.
328