D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 271

show arpentry
Parameters
Restrictions
Example Usage:
To display the ARP table:
DGS-3324SRi:4#show arpentry
Command: show arpentry
ARP Aging Time : 30
Interface
-------------
System
System
System
System
System
System
System
System
System
System
System
System
System
System
System
System
System
System
System
System
Total Entries = 20
DGS-3324SRi:4#
clear arptable
Purpose
Syntax
Description
Parameters
Restrictions
xStack Gigabit Layer 3 Switch Command Line Interface Manual
Switch's ARP table.
<ipif_name 12> − The name of the IP interface the end node or
station for which the ARP table entry was made, resides on.
<ipaddr> − The network address corresponding to the IP interface
name above.
static − Displays the static entries to the ARP table.
None.
IP Address
---------------
10.0.0.0
10.1.1.169
10.1.1.254
10.9.68.1
10.9.68.4
10.10.27.51
10.11.22.145
10.11.94.10
10.14.82.24
10.15.1.60
10.17.42.153
10.19.72.100
10.21.32.203
10.40.44.60
10.42.73.221
10.44.67.1
10.47.65.25
10.50.8.7
10.90.90.90
10.255.255.255 FF-FF-FF-FF-FF-FF
Used to remove all dynamic ARP table entries.
clear arptable
This command is used to remove dynamic ARP table entries from
the Switch's ARP table. Static ARP table entries are not affected.
None.
Only administrator-level users can issue this command.
MAC Address
-----------------
FF-FF-FF-FF-FF-FF
00-50-BA-70-E4-4E
00-01-30-FA-5F-00
00-A0-C9-A4-22-5B
00-80-C8-2E-C7-45
00-80-C8-48-DF-AB
00-80-C8-93-05-6B
00-10-83-F9-37-6E
00-50-BA-90-37-10
00-80-C8-17-42-55
00-80-C8-4D-4E-0A
00-50-BA-38-7D-5E
00-80-C8-40-C1-06
00-50-BA-6B-2A-1E
00-01-02-03-04-00
00-50-BA-DA-02-51
00-50-BA-DA-03-2B
00-E0-18-45-C7-28
00-01-02-03-04-00
263
Type
---------------
Local/Broadcast
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Local
Local/Broadcast