D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 45

DGS-3324SRi:4#create snmp view dlinkview 1.3.6 view_type included
Command: create snmp view dlinkview 1.3.6 view_type included
Success.
DGS-3324SRi:4#
delete snmp view
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete a previously configured SNMP view from the Switch:
DGS-3324SRi:4#delete snmp view dlinkview all
Command: delete snmp view dlinkview all
Success.
DGS-3324SRi:4#
show snmp view
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display SNMP view configuration:
xStack Gigabit Layer 3 Switch Command Line Interface Manual
Used to remove an SNMP view entry previously created on the
Switch.
delete snmp view <view_name 32> [all | <oid>]
The delete snmp view command is used to remove an SNMP
view previously created on the Switch.
<view_name 32> − An alphanumeric string of up to 32 characters
that identifies the SNMP view to be deleted.
all − Specifies that all of the SNMP views on the Switch will be
deleted.
<oid> − The object ID that identifies an object tree (MIB tree) that
will be deleted from the Switch.
Only administrator-level users can issue this command.
Used to display an SNMP view previously created on the Switch.
show snmp view {<view_name 32>}
The show snmp view command displays an SNMP view
previously created on the Switch.
<view_name 32> − An alphanumeric string of up to 32 characters
that identifies the SNMP view that will be displayed.
None.
37