D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 104

DGS-3324SRi:4#show multicast_fdb
Command: show multicast_fdb
VLAN Name
MAC Address
Egress Ports
Mode
Total Entries
DGS-3324SRi:4#
show fdb
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display unicast MAC address table:
xStack Gigabit Layer 3 Switch Command Line Interface Manual
: default
: 01-00-5E-00-00-00
: 1:1-1:5,1:26,2:26
: Static
: 1
Used to display the current unicast MAC address forwarding
database.
show fdb {port <port> | vlan <vlan_name 32> | mac_address
<macaddr> | static | aging_time}
This command will display the current contents of the Switch's
forwarding database.
port <port> − The port number corresponding to the MAC
destination address. The Switch will always forward traffic to the
specified device through this port. The port is specified by listing
the switch number and the port number on that switch, separated
by a colon. For example, 1:3 specifies switch number 1, port 3.
2:4 specifies switch number 2, port 4.
<vlan_name 32> − The name of the VLAN on which the MAC
address resides.
<macaddr> − The MAC address that is present in the forwarding
database table.
static − Displays the static MAC address entries.
aging_time − Displays the aging time for the MAC address
forwarding database.
None.
96