D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 260

download sim_ms
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To download firmware:
DGS-3324SRi:4# download sim_ms firmware 10.53.13.94 c:/dgssri.had
members all
Command: download sim_ms firmware 10.53.13.94 c:/dgssri.had members all
This device is updating firmware. Please wait...
Download Status :
ID MAC Address
--- -----------------
1 00-01-02-03-04-00 Success
2 00-07-06-05-04-03 Success
3 00-07-06-05-04-03 Success
DGS-3324SRi:4#
xStack Gigabit Layer 3 Switch Command Line Interface Manual
Used to download firmware or configuration file to an indicated
device.
download sim_ms [firmware_from_tftp |
configuration_from_tftp] <ipaddr> <path_filename> {[members
<mslist 1-32> | all]}
This command will download a firmware file or configuration file to a
specified device from a TFTP server.
firmware_from_tftp – Specify this parameter if the user wishes to
download firmware to members of a SIM group.
configuration_from_tftp - Specify this parameter if the user wishes to
download a switch configuration to members of a SIM group.
ipaddr – Enter the IP address of the TFTP server.
<path_filename> – Enter the path and the filename of the firmware or
switch on the TFTP server.
members – Enter this parameter to specify the members to which the
user prefers to download firmware or switch configuration files. The
user may specify a member or members by adding one of the
following:
<mslist 1-32> - Enter a value, or values to specify which
•
members of the SIM group will receive the firmware or switch
configuration.
all – Add this parameter to specify all members of the SIM
•
group will receive the firmware or switch configuration.
Only administrator-level users can issue this command.
Result
----------------
252