D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 299

DGS-3324SRi:4#disable dnsr cache
Command: disable dnsr cache
Success.
DGS-3324SRi:4#
Example Usage:
To disable static table lookup for DNS relay.
DGS-3324SRi:4#disable dnsr static
Command: disable dnsr static
Success.
DGS-3324SRi:4#
show dnsr
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To display DNS relay status:
DGS-3324SRi:4#show dnsr
Command: show dnsr
DNSR Status
Primary Name Server
Secondary Name Server
DNSR Cache Status
DNSR Static Cache Table Status
DNS Relay Static Table
Domain Name
-------------------------------------- ---------------
www.123.com.tw
bbs.ntu.edu.tw
Total Entries: 2
DGS-3324SRi:4#
xStack Gigabit Layer 3 Switch Command Line Interface Manual
Used to display the current DNS relay status.
show dnsr {static}
This command is used to display the current DNS relay status.
static − Allows the display of only the static entries into the DNS
relay table. If this parameter is omitted, the entire DNS relay table
will be displayed.
None.
IP Address
10.12.12.123
140.112.1.23
: Disabled
: 0.0.0.0
: 0.0.0.0
: Disabled
: Disabled
291