D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 179

show authen_enable
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display all method lists for promoting user level privileges to administrator level privileges.
xStack Gigabit Layer 3 Switch Command Line Interface Manual
Used to display the method list of authentication methods for
promoting normal user level privileges to Administrator level privileges
on the Switch.
show authen_enable [default | method_list_name <string 15> | all]
This command is used to delete a user-defined method list of
authentication methods for promoting user level privileges to
Administrator level privileges. The window will display the following
parameters:
Method List Name – The name of a previously configured
method list name.
Priority – Defines which order the method list protocols will be
queried for authentication when a user attempts to log on to
the Switch. Priority ranges from 1(highest) to 4 (lowest).
Method Name – Defines which security protocols are
implemented, per method list name.
Comment – Defines the type of Method. User-defined Group
refers to server groups defined by the user. Built-in Group
refers to the TACACS/XTACACS/TACACS+ and RADIUS
security protocols which are permanently set in the Switch.
Keyword refers to authentication using a technique INSTEAD
of TACACS/XTACACS/TACACS+ and RADIUS which are
local (authentication through the local_enable password on
the Switch) and none (no authentication necessary to access
any function on the Switch).
default – Entering this parameter will display the default method list for
users attempting to gain access to Administrator level privileges on the
Switch.
method_list_name <string 15> – Enter an alphanumeric string of up to
15 characters to define the given method list to view.
all – Entering this parameter will display all the authentication login
methods currently configured on the Switch.
None.
171