D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 340

show route preference
Parameters
Restrictions
Example usage:
To view the route preference values for all routes:
DGS-3324SRi:4# show route preference
Command: show route preference
Route Preference Settings
Route Type
----------
RIP
OSPF Intra
STATIC
LOCAL
OSPF Inter
OSPF ExtT1
OSPF ExtT2
DGS-3324SRi:4#
Example usage:
To view the route preference values for the RIP route:
xStack Gigabit Layer 3 Switch Command Line Interface Manual
local – Enter this parameter to view the route preference settings for
the local route.
static - Enter this parameter to view the route preference settings for
the static route.
rip - Enter this parameter to view the route preference settings for
the RIP route.
ospfIntra - Enter this parameter to view the route preference
settings for the Ospf Intra-area route.
ospfInter - Enter this parameter to view the route preference settings
for the OSPF Inter-area route.
ospfExtT1 - Enter this parameter to view the route preference
settings for the OSPF AS External route type-1.
ospfExtT2 - Enter this parameter to view the route preference
settings for the OSPF AS External route type-2.
Entering this command with no parameters will display the route
preference for all routes.
None.
Preference
----------
100
80
60
0
90
110
115
332